Slitter Packaging Procedure

1.  Review the job work order for instructions and customer requirements.

2.     Prepare the coil pallets listed on the job work order, if required.

3.     Transfer slit coils to rotating arms.

4.  Eye to side or standing coils will now have job specific banding added and then skip to #9B.

5.  Load slit coils onto the in-line flip table.

6.     Add required ID banding to each slit coil.

7.     Stack the amount of coils (with the type spacers required) onto pallets per the job work order.

8.     Cycle the palletized coils to last roller bed and add remaining packaging requirements (i.e. OD banding and/or protective paper)

9.    

1. Transfer each pallet with coils to scale to get actual weight. That actual weight and tare weight are entered into Stelplan and then finished goods tags can be printed.

2. Move eye to side or standing coils to scale to get the actual weight. That actual weight for each tag is entered into Stelplan and then the finished goods tag can be printed.